DBX DriveRack PA+ Managment System
Specifications:
| Input | (2) line inputs. (1) RTA Mic input |
| Input Connectors | (2) Female XLR line inputs. XLR RTA Mic input |
| Input Type | Electronically balanced/RF filtered |
| Input Impedance | >40k ohm |
| Max Input | >+20dBu |
| CMRR | > 45dB |
| Mic Preamp Phantom Power | +15VDC (RTA) |
| Mic Preamp Equivalent Input Noise (EIN) | < -117dB, 22Hz-22kHz, 150 ohm (RTA) |
| Output | (6) Line Outputs |
| Output Connectors | Male XLR |
| Output Type | Electronically balanced, RF filtered |
| Output Impedance | 120ohm |
| Max Output | +20dBu |
| Alignment Delay | 10ms per channel (60ms total) |
| A/D Converter | dbx Type IV™ Conversion System |
| A/D Dynamic Range | 110 dB A-weighted, >107 dB weighted |
| Type IV Dynamic Range | 123 dB with transient material, A-weighted, 22kHz BW; 121 dB with transient material, unweighted, 22kHz BW; 115 dB typical with program material, A-weighted, 22kHz BW |
| Sample Rate | 48kHz |
| D/A Dynamic Range | 112 dB A-weighted, 110dB unweighted |
| Dynamic Range | >110 dB A-weighted, >107dB unweighted |
| THD+Noise | 0.004% typical at +4dBu, 1kHz, 0dB input gain |
| Frequency Response | 20Hz – 20kHz, +/- 0.5dB |
| Interchannel Crosstalk | < -110 dB, -120dB typical (input-to-output: < -100 dB) |
| Operating Voltage | 100-120VAC 50/60 Hz - EU: 220-240 VAC 50/60 Hz |
| Power Consumption | 25 W |
| Unit Weight | 5.5 lbs. (2.5 kg) |
| Shipping Weight | 7 lbs. (3.18 kg) |
| Dimensions | 1.75" (4.4cm) H x 5.75"(14.6cm) D x 19" (48.26cm) W |
