Kyoritsu8115 Clamp Sensors/Adaptors
• Permits extension of the AC and DC current ranges of almost any Digital Multimeters (DMMs) without breaking the circuit under test.
• Using KEW 8115 with KEW 1051/1052 (DMM) the display can be set for direct reading in A.
Measuring range |
AC 0.1 - 130Arms (185Apeak) |
DC 0 - ±180A |
Output voltage |
AC 10mV/A |
DC 10mV/A |
Accuracy |
±1.2%rdg±0.4mV (50/60Hz)
±2.5%rdg±0.4mV (40 - 1kHz) |
±1.2%rdg±0.4mV (*) |
Low battery warning |
2.2V±0.2V or less - Red LED flash
(1.9V±0.2V - Automatically power off) |
Conductor size |
Max. Ø12mm |
Withstand voltage |
AC 3540V (RMS 50/60Hz) for 5 sec. |
Operating temperature & humidity range |
-10 to 55ºC, relative humidity 85% or less (no condensation) |
Output impedance |
Approx. 10Ω or less |
Applicable standards |
IEC 61010-1 CAT III 300V Pollution degree 2,
IEC 61010-2-032, IEC 61326-1 |
Power source |
DC3V (size AAA alkaline battery LR03×2pcs)
* Continuous use: approx. 40 hours
(Auto power off: approx. 20 minutes) |
Cord length |
Approx. 1,200mm |
Output connector |
Φ4mm banana plug |
Dimensions |
127(L)×42(W)×22(D) mm |
Weight |
Approx. 140g |
Accessories |
Soft case, LR03×2, Instruction manual |
*This accuracy is defined after the completion of the Kew 8115 zero-adjustment whilst connected to a DMM.